RainSoft turns ordinary water into extraordinary water . . .
The smart, economical way to enjoy the best water possible.
Application Limitations
Maintenance Requirements
Incoming water should contain no oil or hydrogen sulfide;
The filtering media will eventually become exhausted or
organic matter not to exceed 4 - 5 ppm; dissolved
consumed and will need replacement. The replacement
oxygen content to equal at least 15% of iron content with
schedule will depend on the incoming water quality and
a pH of 6.8 or more. If influent water has pH of less than
the amount of water you use. Your local authorized
6.8, a pH adjustment will be necessary. Chlorination
RainSoft dealer can provide you with replacement
greatly reduces birm s activity, and dosages should be
schedules based on your water-using habits and your
held to a minimum. Birm may also be used for
incoming water quality.
manganese reduction. In these applications, the water to
The regeneration valve is designed to last a lifetime. From
be treated should have a pH of 8.0 - 9.0 for best results.
time to time it may be necessary to clean and lubricate
If water also contains iron, the pH should be below 8.5.
the moving parts. Your water quality and the amount of
High pH conditions may cause formation of colloidal
regenerations will affect this schedule. Your dealer is
iron, which is very difficult to filter out. Well pumps must
knowledgeable in different water qualities and the
produce greater flow rate than the required backwash
necessary parts required in completing this service.
flow rate. Maximum practical limit of Iron (Fe +2 ) is
10 ppm; Manganese (Mn +2 ) is 2 ppm. Actual results
may vary based on local water conditions.
CALIFORNIA RESIDENTS: Water treatment devices sold to retail consumers in California
accompanied by certain health claims must be certified by the California Department of
Health Services. The RainSoft RFC R Series filter is not certified by the State of California for the
purpose of making health claims.
RainSoft Model RFC R Series filter is UL and CSA Listed, and is certified by TÜV to meet
European CE requirements. Refer to the manufacturer s Performance Data Sheet for specific
claims and certifications.
Benefits will be provided by various types of RainSoft equipment when installed and operated
according to manufacturer s recommendations. Operational, maintenance and replacement
requirements are essential for the product to perform as advertised. All claims based on best
available information at time of printing. Manufacturer makes no representations as to the
suitability of this equipment for a particular application. Buyer relies entirely on dealer s
recommendations in the purchase of this equipment. Independent RainSoft dealers may include,
together with your RainSoft product, a product or component that is not manufactured by
RainSoft or their parent company, AWTP, LLC. Any non-RainSoft product may be covered by the
manufacturer of that product, and is not covered by the RainSoft warranty. AWTP, LLC does not
warrant that your RainSoft product and the non-RainSoft product will perform properly when used
together, and assumes no liability therefore.
Part No. 15989b
©2006 RainSoft Division of AWTP, LLC