RainSoft turns ordinary water into extraordinary water . . .
The smart, economical way to enjoy the best water possible.
Application Limitations
Maintenance Requirements
The rate of flow from the well pump must be greater than
The filtering media will eventually become exhausted or
6 gallons per minute (GPM) and the incoming hardness
consumed and will need replacement. The replacement
level must be less than 5 grains per gallon (GPG). Failure
schedule will depend on the incoming water quality and
to have the proper backwash rate or exceeding the
the amount of water you use. Your local authorized
incoming hardness level will inhibit the filters ability to
RainSoft dealer can provide you with replacement
perform as designed. Frequent backwashing may be
schedules based on your water-using habits and your
required depending on incoming water quality. Local
incoming water quality.*
water conditions will determine whether your dealer
The regeneration valve is designed to last a lifetime. From
selects Azinute II or Super Azinute Blend filtering media
time to time it may be necessary to clean and lubricate
for your application.*
the moving parts. Your water quality and the amount of
regenerations necessary will affect this schedule. Your
dealer is knowledgeable in different water qualities and
the necessary parts required in completing this service.
CALIFORNIA RESIDENTS: Water treatment devices sold to retail consumers in California
accompanied by certain health claims must be certified by the California Department of
Health Services. The RainSoft RFC Y and YZ Series filters are not certified by the State of
California for the purpose of making health claims.
RFC models Y and YZ are UL and CSA listed, and are certified by TÜV to meet European CE
requirements. RFC models Y and YZ are tested and certified by the WQA to Standard S-200.
See the performance data sheet for specific reduction claims.
Benefits will be provided by various types of RainSoft equipment when installed and operated
according to manufacturer’s recommendations. Operational, maintenance and replacement
requirements are essential for the product to perform as advertised. All claims based on best
available information at time of printing. Manufacturer makes no representations as to the
suitability of this equipment for a particular application. Buyer relies entirely on dealer’s
recommendations in the purchase of this equipment. Independent RainSoft dealers may include,
together with your RainSoft product, a product or component that is not manufactured by
RainSoft or their parent company, AWTP, LLC. Any non-RainSoft product may be covered by the
manufacturer of that product, and is not covered by the RainSoft warranty. AWTP, LLC does not
* The system will perform with hardness levels above 5 GPG. The bed life will be reduced
warrant that your RainSoft product and the non-RainSoft product will perform properly when used
based on the hardness level. Frequent backwashing will prolong bed life.
together, and assumes no liability therefore.
Part No. 15990b
©2007 RainSoft Division of AWTP, LLC